DAHON Bike User Manual

SERVICE INSTRUCTIONS

© 2009 DAHON, BPSA • 2009.09.DS.ENStep 1 - Loosen the height adjustment bolt at the back of the stem with a 5 mm Allen key. Step 4 - Loosen the angle

© 2009 DAHON, BPSA • 2009.09.DS.ENStep 1 - Loosen the angle adjustment bolt in the middle of the stem with a 5 mm Allen key.Step 5 – Lift the stem off

© 2009 DAHON, BPSA • 2009.09.DS.ENWith the VRO clamp the handlebar can be easily adjusted to t the rider’s height or desired riding position by movin

© 2009 DAHON, BPSA • 2009.09.DS.ENAndros Stem AdjustmentTools Needed:• 5 mm Allen KeySafety LockLock LeverTightening Screws Overview Make sure that th

© 2009 DAHON, BPSA • 2009.09.DS.ENAndros Stem Adjustment(continued)Step 4 - While establishing the desired position, make sure that the handlebar is r

© 2009 DAHON, BPSA • 2009.09.DS.ENThe latch of the handlepost hinge on Dahon folding bikes should be checked before each ride to make sure that it clo

© 2009 DAHON, BPSA • 2009.09.DS.ENAdjusting the Handlepost HingesECO RADIUS RADIUS VTIGHTEN: Turn the latch bolt as indicated by the arrow.LOOSEN: Tur

© 2009 DAHON, BPSA • 2009.09.DS.ENYour headset should be checked periodically. If there is play or looseness in the fork or handlepost, the headset ma

© 2009 DAHON, BPSA • 2009.09.DS.ENThe frame hinge is the most important part of a folding bicycle. Care should be taken to check that the hinge is adj

© 2009 DAHON, BPSA • 2009.09.DS.ENThe V-Clamp HingeThere are a several versions of the V-Clamp. Instructions on adjusting the V-Clamp are provided bel

© 2009 DAHON, BPSA • 2009.09.DS.ENContentsDealer Pre-Delivery Checklist... 3Dahon F.I.T. Stem ...

© 2009 DAHON, BPSA • 2009.09.DS.ENTIGHTEN: Turn the hinge clamp bolt counter- clockwise as indicated by the arrow (facing the hinge turn the screw upw

© 2009 DAHON, BPSA • 2009.09.DS.ENStep 1 - Loosen the Lock Nut: Use a 10 mm wrench. Turn the wrench as indicated by the arrow.Step 2 - Close the hinge

© 2009 DAHON, BPSA • 2009.09.DS.ENAdjustment BoltSafety ScrewOC BoltPivot BoltBikes equipped with the LockJaw hinge look just like a regular bike – yo

© 2009 DAHON, BPSA • 2009.09.DS.ENOpen/Close the LockJaw HingeUse a 6 mm Allen key.For instructions on how to fold a LockJaw equipped bike, please ref

© 2009 DAHON, BPSA • 2009.09.DS.ENAdjust the Tightness of the LockJaw (The Adjustment Bolt)The LockJaw is exceptionally stiff and stable, but will req

© 2009 DAHON, BPSA • 2009.09.DS.ENVersion BTools Needed: • 6 mm Allen key • 2.5 mm Allen keyNOTE: Only turn the adjustment bolt in small increments (e

© 2009 DAHON, BPSA • 2009.09.DS.ENThe Pivot BoltWARNING: Under normal use, the pivot bolt should not need adjustment. If the pivot bolt needs adjustme

© 2009 DAHON, BPSA • 2009.09.DS.ENThe Kore I-beam saddle is a revo-lutionary new saddle system that cuts down dramatically on weight, while at the sam

© 2009 DAHON, BPSA • 2009.09.DS.ENThe original low-prole Dahon Neos derailleur is specially designed for small wheels. The Neos allows for twice as m

© 2009 DAHON, BPSA • 2009.09.DS.ENHigh AdjustmentTurn the top adjustment screw to adjust so that the guide pulley is below the outer line of the small

© 2009 DAHON, BPSA • 2009.09.DS.ENDealer Pre-delivery ChecklistThis pre-delivery checklist needs to be lled out to activate the warranty. This pre-de

© 2009 DAHON, BPSA • 2009.09.DS.ENLow AdjustmentTurn the low adjustment screw so that the guide pulley moves to a position directly in line with the l

© 2009 DAHON, BPSA • 2009.09.DS.EN3 2 223 2 223 2 223 2 22Index Shifting AdjustmentUse the shifter while turning the crank arm to move the derailleur

© 2009 DAHON, BPSA2009.09.ENDahon California INC.833 Meridian StreetDuarte CA 910101-800-442-3511www.dahon.comDahon TW8F-8, #6, Lane 609, Chung Hsin R

© 2009 DAHON, BPSA • 2009.09.DS.ENDealer Pre-delivery ChecklistPart Item to Check Passed RemarksFrameThe frame is free from damage or defect.All frame

© 2009 DAHON, BPSA • 2009.09.DS.ENPart Item to Check Passed RemarksChainThe chain is correctly tensioned between the front and rear sprockets, free fr

© 2009 DAHON, BPSA • 2009.09.DS.ENPart Item to Check Passed RemarksTiresAre free from physical damage or defect, are correctly seated in the right dir

© 2009 DAHON, BPSA • 2009.09.DS.ENThe F.I.T. system makes it easy for a rider to adjust the height of the handlebars. An integrated groove in the stem

© 2009 DAHON, BPSA • 2009.09.DS.ENStep 1 - Loosen the height adjustment bolt at the back of the stem with a 5 mm Allen key.WARNING: Do not loosen the

© 2009 DAHON, BPSA • 2009.09.DS.ENStep 1 - Loosen the angle adjustment bolt in the middle of the stem with a 5 mm Allen key.4mmStep 4 - Loosen (but do